How to renew firmware on stand alone controller for "Smart" series products

Today i will show you how change firmware in our stand alone controllers.

This is not difficult - you need just internet connection and few minutes.

We use same type controllers to all our products "Smart" series. Difference in controllers for different products not to big:

Name of product	Used outputs	Micro SD storage	Signal amplifier	External power
Wings 165 leds	1	yes	not	not
Wings 330 leds	2	yes	not	not
Wings 510 leds	2	yes	not	optional
Jackets	3-4	optional	yes	yes
3D-forms	2	yes	not	optional
Flyboard suits	3-4	optional	yes	yes
Dance suits	3-4	yes	yes	yes
Stilts	6-8	optional	yes	yes

But all of them can be updated. We work on new possibilities every time and some time create new version of firmware. For all product little different. But same way how to update.

Next few easy steps:

Go to the ETERESHOP.COM

Open DATA/DOWNLOAD

After some trying - i still not connect to server :(
i don't know why - for this is reason i try it with special software FileZilla, after try connect i find in answer than my IP temporary blocked. I just reload my wifi router and try one more time.
browser still not connect - but FileZilla connect normally.
In all case i must show how to change firmware - you can use any type of connection to our FTP server.

FileZilla

Enter login details

After connection we find some folders

After chose folder - we need download loader(i use OS and load *.dmg)

Just select and move to your folder

Go to your product folder

First you need find your product, if you have product same like other - you can copy firmware directly from here.
Old version are stored in History folder.
But if your product is unique, we put all needed info to folder with your name or order number.
Be careful, and if need help - just ask your trade manager.

Personal folder

Firmware for download

Next step install loader and use it

Connect controller to laptop and wait few second

Open loader and press button on control board PCB

Chose firmware file

Press Auto button in window and button on controller PCB

All done

!!! Important: If your controller have micro SD card, you also need copy from server file config.txt and put it on your SD card. Old file you must just delete. If you not do this - controller can work not correct.

Here you can look how to do it on video: